SEAMLESS TONGUE AND GROOVE PLASTIC PANELS
is a smooth seamless interlocking 16” wide corrugated vinyl panel that is a high gloss bright white UV protected (class A) sanitary panel system
- This durable, lightweight, impact resistant panel is Ideal for ceilings, walls, partitions, signage and many other building applications
- Use in dairy facilities, processing plants, hog and poultry buildings, car washes, high wash down areas, and various other building applications
- Class A Fire Rated (E-84 Flame Spread =15 Smoke Developed = 350)
- Easy to remove, factory applied protective film guards against scratches, scuffing, and dirt.
- Easy to clean maintenance free all plastic paneling for interior or exterior use
- 16” width X 8’, 12’, 16, & 20’ lengths • 10mm (.400”) thickness
Other lengths available upon request
Brightens the interior for fresh, smooth, and seamlessly clean look
High UV protection added - will not yellow or fade due to light.
Sanitary - resists rot, mold, mildew, moisture and chemicals
Tongue and groove design - no exposed fasteners with seamless joints
Installation moldings, dowel pin connectors and screws available
USDA and Agriculture Canada Accepted.
TS - Technical Support — Physical and Engineering Properties of Vinyl
ASTM No. Value/Units* Hardness, Rockwell R D-785 112 IZOD Impact D-256 18 Ft.-Lbs./In. Flexural Strength D-790 11,200 PSI Flexural Modulus D-790 380,000 PSI Tensile Yield D-638 6,200 PSI Tensile Modulus D-638 380,000 PSI Tensile Impact D-1822 72 Ft.-Lbs./In. Flame Spread Index** E-84 15 Spoke Developed Value** E-84 350 * These are typical values and are not to be construed as specific product limits. **12/28/06 SGS Test Report Number 840303-3
Nu-Plank Install Guide - PDF Format
* Nonwarranty: The information contained in this literature is presented in good
faith and is believed to be accurate, but without guarantee. Conditions of use
are beyond our control and all risks are assumed by the user. Nothing herein is
a recommendation for uses which infringe valid patents or as extending a license
under valid patents.
* NOTICE: Panels and components may be combustible, and accordingly should be
used in compliance with insurance regulations, local and national ICC Building
codes.
